1 2 15

IC-ADC-FMCPa

14-bit, Quad 2 or 2.5/2.6 Gsps (option: 3 Gsps)

#9370db

Overview

The IC-ADC-FMCPa board is part of our Front End Processing product line to respond to the increasing demand in fast data sampling for embedded systems especially in the fi eld of Software-defi ned Radio, Radar and Electronic Warfare and solutions.
Designed for applications where high data sampling is required, the IC-ADC-FMCPa is a VITA 57.4 FPGA Mezzanine Card (FMC).
It offers a flexible connectivity with our FPGA 3U and 6U Front End Processing boards running our Signal Processing Reference Design (including signal acquisition, Processing DMA Engine, data storage, signal generation,…) thus allowing customers to streamline development of high performance signal acquisition systems by concentrating their efforts on their most critical tasks.
The IC-ADC-FMCPa is available in three sample rate configurations : 2 and 2.5/2.6 Gsps (3 Gsps as an option).

Features

Analog Inputs
• Two Analog Devices ADCs with 14-bit resolution
• Sampling rate up to 2.6 Gsps (option 3Gsps)
• 4 channels with SSMC connectors (*)
• Input impedance 50 Ohm AC coupled
• Full scale ampliture 1.5 V peak-peak (soft. confi g.)
• Analog input bandwidth (-3dB) 10MHz – 4GHz

Clocks
• Sampling Clock (CKI):
• SSMC (*) connector, 50 Ohm, AC coupled
• Input level. Sine wave: 0 to +10dB. Square wave:
• LVPECL single ended
• Frequency range: CKI from 1900 MHz to 2600 MHz

ADC digital interface
• ADC Output: CML – 16 lines 12.5Gbps, at 2.5 GSPS, DDC bypassed
(options: 13Gbps, at 2.6 GSPS, DDC bypassed
15Gbps, at 3 GSPS, DDC bypassed)

Board Electrical/environmental
• VITA 57.4 HPC single width module with Region 1 and
• front I/O
• Power dissipation: 10 W (TBC)
• FMC I/O voltage: 12V, 3.3V, VADJ = 1.8 V
• Air cooled, Rugged air cooled and conduction cooled version

Diagram

IC-ADC-FMCPa - diagram

Grades

StandardExtendedRuggedConduction-cooled 71°CConduction-cooled 85°C
CoatingOptionalYesYesYesYes
Operat. Temp.0 to 55°C-20 to 65°C-40°C to 71°C (*)-40°C to 71°C at the thermal interface (*)-40°C to 85°C at the thermal interface (*)
Rec. airflow1 .. 2 m/s2 .. 3 m/s2 .. 5 m/s--
Oper. HR% no cond.5 to 90%5 to 95%5 to 95%5 to 95%5 to 95%
Storage Temp.-45°C to 85°C-45°C to 85°C-45°C to 100°C-45°C to 100°C-45°C to 100°C
Sinusoidal Vibr2G [20..2000]Hz2G [20..2000]Hz5G [20..2000]Hz5G [20..2000]Hz5G [20..2000]Hz
Random Vibr0.002g2 /Hz [10..2000]Hz0.002g2 /Hz [10..2000]Hz0.05g2 /Hz [10..2000]Hz0.1g2 /Hz [10..2000]Hz0.1g2 /Hz [10..2000]Hz
Shock 1/2 Sin. 11ms20G20G40G40G40G

Related products

6U VPX FPGA board with two FMC+ sites
#d54444
  • 6U VPX
  • 2 * AMD Kintex™ UltraScale™/ Virtex™ UltraScale+™ FPGAs
  • 1 * NXP QorIQ LS1046A
  • Gen2/3 PCIe switch
  • Giga Ethernet L2 switch
  • 2 * FMC+ sites
3U VPX VITA 66.5 FPGA board with FMC+ Site
#d54444
  • 3U VPX – VITA 66.5
  • 1 * AMD Kintex™ UltraScale™ FPGA
  • 2 * DDR4 banks (up to 4GB each)
  • 1 * AMD Artix™7 control node
  • 1 * FMC+ site (VITA 57.4)
3U VPX VITA 66.5 FPGA board with FMC+ site
#d54444
  • 3U VPX – VITA 66.5
  • 1 * AMD Versal™ FPGA
  • 2 * DDR4 banks (up to 8GB each)
  • 1 * FMC+ site (VITA 57.4)
  • SLT3-PAY-1F1U1S1S1U1U2F1H-14.6.11
  • Aligned with the SOSATM Technical Standard