IC-DC2-VPX3a

Intel Core2 Duo SL9380 SBC Interface







<b>Interface Concept </b><br />
Designer, manufacturer of industrial embedded products, including switching Ethernet, Communications interfaces and CPU boards.
Intel® Core™2 Duo SL9380 SBC Interface

Intel® Core™2 Duo SL9380 SBC
Standard, Extended, Rugged & Conduction Cooled grades (*)


Interface Concept is a
General Member of the Intel® Embedded and Communications Alliance


IC-DC2-VPX3a is based on the Intel® Core™2 Duo processor SL9380 (or SU930) associated to the Intel® 3100 Chipset.

Designed for applications requiring a very high level of performance in a compact 3U form factor, the IC-DC2-VPX3a board provides a flexible combination of interfaces, supporting VPX’s high bandwith serial switched fabrics (PCI Express VITA 46.4).

The IC-DC2-VPX3a board is built in the Intel® Product Technologies for Embedded and Communications Applications to enhance performance, flexibility,  reliability and security of demanding multi-tasking applications.


IC-DC2-VPX3a : Main features

Processor Unit : SL9380 (or SU9300)
  • one Intel® Core™2 Duo processor SL9380 (or SU9300)
    • Core speed = 1.8GHz (or 1.2GHz)
    • FSB speed = 800MHz
    • L2 cache = 6MB (3MB)
    • Thermal design power = 17W (10W)
  • DDRII 400 with ECC (up to 2 GBytes)
  • one boot flash memory (up to 16 Mbits)
  • Up to 4GB of Soldered NAND flash.
  • one Calendar clock with supercap backup
  • one thermal monitoring sensor
I/O subsystem :
  • 8 lanes available as one PCIe x8 or two PCIe x4 links (hardware setting)
  • 2*GigaEthernet ports available either as 2*1000BT interfaces or 2*1000KX (or SGMII) interfaces on P1 (factory setting)
  • 2* RS232 UART
  • 2 * USB2 ports
  • 2 * SATA ports
  • 8 GPIOs
  • I2C bus
Accessories :
  • Engineering kit for debug : JTAG/COP, console,...
  • 3U Rear Transition Module
Software : Interface Concept provides BSP for VxWorks® and Linux® (WindRiver Linux for Network Equipment or Interface Concept distribution). Other Real Time Operating Systems (LynxOS, Integrity...) can be ported on request.

An Engineering kit is available, providing :
  • a console port (RJ45 connector),
  • a COP/JTAG connector which accommodates emulation probes,
  • a JTAG connector allowing onboard CPLD programming.

(*) If the required environnement grade is not available, please consult us.
Depending on quantities, this board can also be customized to fully match your needs (processor, memory, IO ports...).
Feel free to contact our sales department.
All our products are compliant, nevertheless leaded versions can be provided on request.

Send this article to a friend Print the page

29510 BRIEC DE L' ODET - FRANCE
Tel. : +33(0)2 98 573 030 - Fax : +33 (0)2 98 573 000
info@interfaceconcept.com


Copyright © Anaximandre 2010 - Administration - Legal Disclaimer

Powred by Ker-e-liamm