Ce site utilise des cookies pour des mesures d’audience. En cliquant sur « J’accepte », vous approuvez notre politique de cookies. En savoir plus J’accepte



Carte FMC optique VITA 57.1/57.4

  • FMC
  • VITA57.1/57.4 HPC Compliant
  • Up to 12 10Gbs transceivers
  • 2 MT-interface 12 fibers

IC-OPT-FMCPa - VITA 57.1/57.4 optical FMC card

The IC-OPT-FMCPa board is part of our Front End Processing product line to respond to the increasing demand in fast data communication for High Performance Embedded Computing systems.

Designed for applications where high data transmissions are required, the IC-OPT-FMCPa is a VITA 57.1 or 57.4 FPGA Mezzanine Card (FMC) that offers a flexible connectivity with our FPGA 3U and 6U Front End Processing boards running our Signal Processing Reference Design (including signal acquisition, Processing DMA Engine, data storage, signal generation,…)

thus allowing customers to streamline development of high performance signal acquisition systems by concentrating their efforts on their most critical tasks.

Communication interfaces
Two 12 MT-type optical connectors, one of the TX engine and one for the RX engine. An industry standard optical ribbon with an MT-terminated compatible connector at one end can plug into each receptacle with a small metal clip to hold it in place.

One SSMC connector for external reference clock, AC coupled and 50 ?-terminated on-board. It can be driven by either a sine wave source (0 to 10 dBm), or a square wave source (LVPECL / CMOS).

Clock signal (SEC_REF) provided by FPGA carrier on FMC connector on HB19_P/N pins. LVDS 100 ? differential signal and AC coupled input.

Local 25 MHz crystal (optional oscillator for special frequency generation when necessary)

Board Electrical/environmental
VITA 57.1/57.4 module
Power dissipation: 3.5 W including the consumption of the two optical engines.
FMC I/O voltage: VADJ=1.8V or 2.5V (factory settings)
Standard, Extended, Rugged and Conduction Cooled grades

Interface features

Front board
2 MT-interface 12 fibers

FMC connector according to VITA 57.1/57.4:
8 (57.1) or 12 (57.4) data differential pairs connected to multi-gigabit transceivers
Multi-gigabit transceivers clock output
Reference clock input
Clock output
I2C bus
Laser control, TX/RX alarm and clock status

IC-OPT-FMCPa - VITA 57.1/57.4 optical FMC card diagram
IC-OPT-FMCPa - VITA 57.1/57.4 optical FMC card diagram
Criterion Standard Extended Rugged Conduction-cooled 71°C Conduction-cooled 85°C
Coating Optional Yes Yes Yes Yes
Operat. Temp. 0 to 55°C -20 to 65°C -40°C to 71°C or 85°C (*) -40°C to 71°C
at the thermal interface (*)
-40°C to 85°C
at the thermal interface (*)
Rec. airflow 1 .. 2 m/s 2 .. 3 m/s 2 .. 5 m/s - -
Oper. HR% no cond. 5 to 90% 5 to 95% 5 to 95% 5 to 95% 5 to 95%
Storage Temp. -45°C to 85°C -45°C to 85°C -45°C to 100°C -45°C to 100°C -45°C to 100°C
Sinusoidal Vibr 2G [20..2000]Hz 2G [20..2000]Hz 5G [20..2000]Hz 5G [20..2000]Hz 5G [20..2000]Hz
Random Vibr 0.002g2 /Hz
0.002g2 /Hz
0.05g2 /Hz
0.1g2 /Hz
0.1g2 /Hz
Shock 1/2 Sin. 11ms 20G 20G 40G 40G 40G
(*) Temperature grades are subject to availability according to IC products. Please consult us.

Produits associés


FPGA Boards

  • 6U VPX
  • 2 * Kintex® UltraScale™/ Virtex® UltraScale+™ FPGAs
  • QorIQ LS1046A
  • Gen2/3 PCIe switch
  • Giga Ethernet L2 switch
  • 2 * FMC+ sites


Single Board Computers

  • 6U VPX
  • Dual Intel® Xeon® D-1539/D-1559 processor
  • up to 128 GB DDR4 with ECC
  • Xilinx Kintex®-7 FPGA
  • 40 GbE & PCIe Gen3 interfaces
  • XMC slot


FPGA Boards

  • 3U VPX 
  • 1 * Kintex® UltraScale™ FPGA
  • 2 * DDR4 banks (up to 4GB each)
  • 1 * Artix®-7 control node
  • 1 * FMC+ site (VITA 57.4)