Ce site utilise des cookies pour des mesures d’audience. En cliquant sur « J’accepte », vous approuvez notre politique de cookies. En savoir plus J’accepte

Produits

IC-CMC-VPX6a

6U VPX PMC/XMC Carrier & Processing board

  • 6U VPX
  • PMC/XMC carrier board
  • Xilinx Kintex®-7 FPGA
  • conduction-cooled compliant

IC-CMC-VPX6a 6U VPX PMC/XMC Carrier & Processing board

The IC-CMC-VPX6a is 6U VPX carrier supporting legacy PMC or XMC boards,but it is also more than that.

Thanks to the embeded Xilink Kintex-7 FPGA, the ICCMC- VPX6a provides processing capabilities on signals coming either from the XMC slot or the backplane,

By so doing, the IC-CMC-VPX6a can optimise the use of a single VPX slot, allowing high cost reduction.

Our IC-GRA-VPX6a is an illustration of the capabilities of this carrier (refer to the IC-GRA-VPX6a Data Sheet for details).

The modular design of the IC-CMC-VPX6a means it can also be used for very specific applications not necessarily detailed here. Consult us to share your specifications.

FPGA:
Xilinx Kintex-7 325T (FBG900)
1 GByte DDR3 SDRAM memory bank
1 user SPI Flash Eeprom
1 * PMC/XMC slot:

XMC
One PCIe x8 port to Jn15
Jn16 IOs routed to the backplane in accordance with P3w3P4-X38s+X12d+X8d signal assignments (VITA46.9)

PMC
conventional PCI 32/64 bits 33/66MHz, and
PCI-X 32/64 bits 66/100/133 MHz (3.3V PCI bus signalling)
Jn14 IOs routed to the backplane in accordance with P3w1-P64s signal assignments (VITA46.9)

1 * XMC slot:
One PCIe x8 port to Jn25
Jn26 IOs routed to the backplane in accordance with P5w3P6-X38s+X8d+X12 signal assignments (VITA46.9)
24 LVDS (from FPGA)
GTX (from FPGA)

Miscellaneous
PIC μ-controller for System Management (per VITA 46.11)
Power supply monitoring / Temperature sensor...
Status LEDs
Engineering kit for debug: JTAG/COP...

Front:
Console and USB port

Note: some configurations require factory settings

The IC-CMC-VPX6a is a 6U x 4HP (1”) VPX board compliant with 6U module definitions of the VITA 46.0 standard (0.80 or 0.85” : please consult us), available in air-cooled and conduction cooled versions.

IC-CMC-VPX6a 6U VPX PMC/XMC Carrier & Processing board diagram
IC-CMC-VPX6a 6U VPX PMC/XMC Carrier & Processing board diagram
Criterion Standard Extended Rugged Conduction-cooled 71°C Conduction-cooled 85°C
Coating Optional Yes Yes Yes Yes
Operat. Temp. 0 to 55°C -20 to 65°C -40°C to 71°C or 85°C (*) -40°C to 71°C
at the thermal interface (*)
-40°C to 85°C
at the thermal interface (*)
Rec. airflow 1 .. 2 m/s 2 .. 3 m/s 2 .. 5 m/s - -
Oper. HR% no cond. 5 to 90% 5 to 95% 5 to 95% 5 to 95% 5 to 95%
Storage Temp. -45°C to 85°C -45°C to 85°C -45°C to 100°C -45°C to 100°C -45°C to 100°C
Sinusoidal Vibr 2G [20..2000]Hz 2G [20..2000]Hz 5G [20..2000]Hz 5G [20..2000]Hz 5G [20..2000]Hz
Random Vibr 0.002g2 /Hz
[10..2000]Hz
0.002g2 /Hz
[10..2000]Hz
0.05g2 /Hz
[10..2000]Hz
0.1g2 /Hz
[10..2000]Hz
0.1g2 /Hz
[10..2000]Hz
Shock 1/2 Sin. 11ms 20G 20G 40G 40G 40G
(*) Temperature grades are subject to availability according to IC products. Please consult us.

Produits associés

IC-FEP-VPX6a

FPGA Boards

  • 6U VPX
  • 2*Xilinx Virtex®-6 FPGAs
  • 1*QorIQ processor P2020
  • Spartan®-6 LX-45T 
  • 1 GB DDR3 with ECC
  • PCIe switch

IC-GRA-XMCc

Graphics

  • XMC
  • AMD Radeon E8860 GPU
  • 6*independent display controllers
  • OpenCL™
  • Stanag 3350 compliant

IC-INT-VPX6a

Single Board Computers

  • 6U VPX
  • Dual Intel® Core™ i7 processors (Gen2)  
  • DDR3-1333 with ECC 
  • on-board SATA NAND SSD
  • Xilinx®Kintex®-7 FPGA
  • XMC/FMC slot