Ce site utilise des cookies pour des mesures d’audience. En cliquant sur « J’accepte », vous approuvez notre politique de cookies. En savoir plus J’accepte



UltraScale™ FPGA 6U VPX board with FMC+ sites

  • 6U VPX
  • 2*Kintex® UltraScale™/ Virtex® UltraScale+™
  • QorIQ LS1046A
  • Gen2/3 PCIe switch
  • Giga Ethernet L2 switch
  • 2*FMC+ sites

IC-FEP-VPX6e - 6U VPX Xilinx Ultrascale FPGA board

Based on the latest Xilinx 20nm FPGA family, the IC-FEP-VPX6e enhances the Front-End Processing (FEP) Interface Concept product line.

By offering a higher performance/power consumption ratio compared to previous FPGAs, the UltraScale™ FPGAs make the IC-FEP-VPX6e the perfect solution to applications requiring DSP intensive processing in a 6U VPX form factor.

The IC-FEP-VPX6e together with other IC building blocks (Intel® and PowerPC SBCs, Ethernet Switches & Routers, FMC) running our Signal Processing Reference Design are the ideal platforms for customers who
want to streamline development by concentrating their efforts on their most strategical tasks.

Processing Units
- QorIQ® LS1046A - quad 64-bit Arm Cortex®-A72 cores @1,8 GHz:
   - 4 GB DDR4 ECC
   - 2* 1Gbit QSPI Flash
   - on board SSD (32GB), eMMC
   - optional Nand Solid-state Disk (eUSB module)
- Two Kintex® UltraScale™ KU115, Virtex® UltraScale™/ UltraScale+™,
   both offering : 
   - Two banks of DDR4 : 64-bit wide, up to 4GB each
The two FPGAs are interconnected:
   - directly via 12 GTY lanes and 24 differential pairs
   - via the Gen2/3 PCIe switch

One Gen2/3 PCIe switch
One Giga Ethernet L2 switch

VPX Interfaces
- 4 * PCIe x4 ports or 2* PCIe x8 ports (from the PCIe switch)
- GTH ports (2 * GTH x8 from each FPGA)
- General purpose IOs 
   - 16 differential pairs each FPGA
   - 16 differential pairs from one FMC IOs connector (option)
   - GPIOs (from ctrl node FPGA)
- 2 * 10GigaBase-KR (or 1000BaseKX) from the processor
- 2 * 1000BaseKX and 2 * 1000BaseBT ports from the switch
- 1 * RS232 port
- 1 * USB 2.0 port
- PIC µ-controller for System Management (per VITA 46.11)

FMC+ interfaces (HSPC for each FPGA site) 
- 80 * differentials pairs
- 4 * reference clocks
- 24 * GTH/Y lanes

Front panel interfaces
- 1 * USB 2.0, 1 * Ethernet 1000BaseT and 1 * console port.

The IC-FEP-VPX6e is a VPX 6U / 5HP board compliant with 6U module definitions of the VITA 46.0 standard.

It is available in air cooled and conduction cooled grades.

IC-FEP-VPX6e diagram - UltraScale™ FPGA 6U VPX board with FMC+ sites
IC-FEP-VPX6e diagram - UltraScale™ FPGA 6U VPX board with FMC+ sites
Criterion Standard Extended Rugged Conduction-cooled 71°C Conduction-cooled 85°C
Coating Optional Yes Yes Yes Yes
Operat. Temp. 0 to 55°C -20 to 65°C -40°C to 71°C or 85°C (*) -40°C to 71°C
at the thermal interface (*)
-40°C to 85°C
at the thermal interface (*)
Rec. airflow 1 .. 2 m/s 2 .. 3 m/s 2 .. 5 m/s - -
Oper. HR% no cond. 5 to 90% 5 to 95% 5 to 95% 5 to 95% 5 to 95%
Storage Temp. -45°C to 85°C -45°C to 85°C -45°C to 100°C -45°C to 100°C -45°C to 100°C
Sinusoidal Vibr 2G [20..2000]Hz 2G [20..2000]Hz 5G [20..2000]Hz 5G [20..2000]Hz 5G [20..2000]Hz
Random Vibr 0.002g2 /Hz
0.002g2 /Hz
0.05g2 /Hz
0.1g2 /Hz
0.1g2 /Hz
Shock 1/2 Sin. 11ms 20G 20G 40G 40G 40G
(*) Temperature grades are subject to availability according to IC products. Please consult us.

Produits associés


Ethernet Switches

  • 6U VPX
  • Managed Layer 2+/ 3 switch
  • VITA 65.0 SLT6-SWH-16U16F-10.4.5
  • Up to 91 ports
  • 1000BASE-T, SFP+ & QSFP (front)
  • 1000BASE-KX/10GBASE-KR, 40GBASE-KR4 (rear)
  • FMC - VITA57.4 HSPC Compliant
  • 4 Channels 14-bit, 2 or 2.5/2.6 Gsps A/D
  • JESD204B Interfaces
  • SSMC Connectors
  • Conduction-cooled compliant


Single Board Computers

  • 6U VPX
  • Dual Intel® Xeon® D-1500 processor 
  • up to 128 GB DDR4 with ECC 
  • Xilinx Kintex®-7 FPGA
  • PCIe Switch
  • XMC slot