Ce site utilise des cookies pour des mesures d’audience. En cliquant sur « J’accepte », vous approuvez notre politique de cookies. En savoir plus J’accepte

Produits

IC-FEP-VPX3c

Xilinx Virtex®-7 3U VPX board with FMC Site

  • 3U VPX
  • 1*Xilinx Virtex®-7 FPGA
  • 2*DDR3-800 banks
  • NOR Flash eeprom
  • FMC site

IC-FEP-VPX3c - 3U VPX Xilinx Virtex-7 FPGA board with FMC Site

The IC-FEP-VPX3c expands our Front End Processing family with a solution based on Xilinx Virtex-7 FPGAs to respond to seemingly insatiable bandwith demand.

Designed for applications requiring a very high level of computing power in a compact 3U form factor, the IC-FEPVPX3c board offers the highest bandwidth with the lowest power consumption.

The IC-FEP-VPX3c and the other building blocks of our 3U OpenVPX product ranges (Intel® and FreescaleTM SBCs, Ethernet Switches & Routers, IO boards/FMC) running our Signal Processing Reference Design (including signal acquisition, Processing, DMA Engine, data storage, signal generation...) are the ideal platforms for customers who want to streamline development by concentrating their efforts on their most critical tasks.

Processing Unit
Xilinx Virtex-7 XC7VX690T (other versionss on demand)
Two banks of DDR3: 64-bit wide, 2GB each
Optional QDRII+ 450MHz, 36-bit wide / up to 36 Mbits
128 MBytes of BPI NOR flash (bitstream storage)

VPX Interfaces
Four 4-lanes fabric ports on P1
16 GTX/GTH (Fat Pipes A, B, C & D)
General purpose IOs on P2
16 differential pairs (from FPGA)
16 differential pairs (from FMC IOs connector)

FMC interfaces
8 GTX/GTH (FPGA part number dependent)
80 differential pairs
4 reference clocks

Miscellaneous
PIC ?-controller for System Management to VITA 46.11
8 LEDs
8 configuration switches

Accessories
Engineering kit : JTAG ports for direct FPGA configuration
Rear Transition Module

The IC-FEP-VPX3c is a 3U VPX board compliant with 3U module definitions of the VITA 46.0 standard.

It is available in air-cooled and conduction cooled versions compliant with VITA 47 classes.

Interface features

P0 connector
VS3, 3V3_AUX, VS1 (+12V for FMC)
REF_CLK
I2C bus, utilities (SYSRESET, NVMRO, GAx)

P1 connector
four 4-lanes fabric ports 
16GTX/GTH(*) (ports A, B, C & D)
RS232 (PIC µC)
GPIOs - user defined

P2 connector
General purpose I/O (on P2)
16 differential pairs
16 differential pairs (from optional FMC IOs connector)
1 RS232 (Virtex-7)
1 USB port (PIC µC)
2 SE GPIOs

FMC connector 
8 GTX/GTH(*)
80 differential pairs
4 clocks (LVDS Diff)

IC-FEP-VPX3c diagram - Xilinx Virtex®-7 3U VPX board with FMC Site
IC-FEP-VPX3c diagram - Xilinx Virtex®-7 3U VPX board with FMC Site
Criterion Standard Extended Rugged Conduction-cooled 71°C Conduction-cooled 85°C
Coating Optional Yes Yes Yes Yes
Operat. Temp. 0 to 55°C -20 to 65°C -40°C to 71°C or 85°C (*) -40°C to 71°C
at the thermal interface (*)
-40°C to 85°C
at the thermal interface (*)
Rec. airflow 1 .. 2 m/s 2 .. 3 m/s 2 .. 5 m/s - -
Oper. HR% no cond. 5 to 90% 5 to 95% 5 to 95% 5 to 95% 5 to 95%
Storage Temp. -45°C to 85°C -45°C to 85°C -45°C to 100°C -45°C to 100°C -45°C to 100°C
Sinusoidal Vibr 2G [20..2000]Hz 2G [20..2000]Hz 5G [20..2000]Hz 5G [20..2000]Hz 5G [20..2000]Hz
Random Vibr 0.002g2 /Hz
[10..2000]Hz
0.002g2 /Hz
[10..2000]Hz
0.05g2 /Hz
[10..2000]Hz
0.1g2 /Hz
[10..2000]Hz
0.1g2 /Hz
[10..2000]Hz
Shock 1/2 Sin. 11ms 20G 20G 40G 40G 40G
(*) Temperature grades are subject to availability according to IC products. Please consult us.

Produits associés

  • FMC - VITA57.1 HPC Compliant
  • 1 Channel 12-bit, 3,2 Gsps A/D or
  • 2 Channels 12-bit, 1,6 Gsps A/D
  • 1 Channel 16-bit, 5,7 Gsps D/A
  • SSMC Connectors
  • Conduction-cooled compliant

IC-FEP-VPX3d

FPGA Boards

  • 3U VPX 
  • 1*Kintex® UltraScale™ FPGA
  • 2* DDR4 banks (up to 4GB each)
  •  1*Artix®-7 control node
  • 1*FMC+ site (VITA 57.4)

IC-PPC-VPX3d

Single Board Computers

  • 3U VPX
  • NXP QorIQ T2080 processor
  • up to 8 GB DDR3-ECC 
  • PCIe switch
  • 1GB NAND flash
  • XMC slot