IC-e6-PMCc







<b>Interface Concept </b><br />
Designer, manufacturer of industrial embedded products, including switching Ethernet, Communications interfaces and CPU boards.


PowerPC 7448 PrPMC
Standard, Extended, Rugged & Conduction Cooled grades (*)


IC-e6-PMCc is a PrPMC mezzanine card, based on the Freescale MPC7448 processor. Compliant with our IC-e6- PMCa, it improves the memory bandwidth, provides new functions as USB2 ports and Onboard Solid-state Disk.
The MPC7448 is a high-performance embedded e600 core, low power PowerPC processor ideal for applications in the fields of defense, industrial automation, medical imaging.

IC-e6-PMCc can be used in conjunction with CompactPCI, VME carriers or proprietary design. Many highly integrated applications can be used on-board :
  • Leading-edge computing,
  • Embedded network control,
  • Signal processing, etc

IC-e6-PMCc : Main features

Processor Unit : MPC7448
  • e600 core running at 1,4 GHz with :
    • L1 caches : 32KB Inst. and 32KB Data with parity
    • 1MB of L2 integrated cache
  • 1GB SDRAM-DDR2 with ECC
  • 128 MB soldered MirrorFlash
  • PPC Real Time clock and four 32 bit-timers
  • BSRAM and Calendar clock with supercap backup
  • Temperature sensor and monitoring
  • Two XOR DMA (useful for RAID, iSCSI)
  • Four IDMA engines.
I/O Subsystem

  • Highly integrated Marvell DiscoveryTM V system controller
  • Three Ethernet 10/100/1000TX ports with :
    • Support for Jumbo frames
    • One of these Ethernet ports is routed to front RJ45 and two on rear Pn4 connector
  • Dual RS232 UART
  • Two USB2 (High & full speed) ports (one front & one rear)
Storage subsystem :
  • Solid state disk based on Flash NandTechnology with dedicated flash drive controller
  • High R/W Throughput with parallel access
  • Up to 8 GB according to the chip availability
Accessories :
  • Dual PMC/XMC VME64 carrier with VME2eSST capabilities : IC-PMC-VMEa.
  • cPCI 3U carrier
Software : Interface Concept provides BSP for VxWorks® and Linux® (WindRiver Linux for Network Equipment or Interface Concept distribution). Other Real Time Operating Systems (LynxOS, Integrity...) can be ported on request.

An Engineering kit is available, providing :
  • a console port (RJ45 connector),
  • a COP/JTAG connector which accommodates emulation probes,
  • a JTAG connector allowing onboard CPLD programming.

(*) If the required environnement grade is not available, please consult us.
Depending on quantities, this board can also be customized to fully match your needs (processor, memory, IO ports...).
Feel free to contact our sales department.
All our products are compliant, nevertheless leaded versions can be provided on request.

Send this article to a friend Print the page

29510 BRIEC DE L' ODET - FRANCE
Tel. : +33(0)2 98 573 030 - Fax : +33 (0)2 98 573 000
info@interfaceconcept.com


Copyright © Anaximandre 2010 - Administration - Legal Disclaimer

Powred by Ker-e-liamm