IC-DC2-VMEa







<b>Interface Concept </b><br />
Designer, manufacturer of industrial embedded products, including switching Ethernet, Communications interfaces and CPU boards.


Intel VME64x VITA 31.1
Single Board Computer

Standard & Extended grades (*)


Interface Concept is a
General Member of the Intel® Embedded and Communications Alliance


IC-DC2-VMEa is a VME64x-VITA31.1 processor board with the latest Intel Core 2 Duo processor based on a new micro-architecture. This technology extends the energy efficient philosophy fi rst delivered in Intel’s mobile Banias micro-architecture and greatly enhances it with many new and leading edge micro-architectural innovations as well as existing Netburst features. The new microarchitecture includes key features such as EM64T, Intel® Wide Dynamic Execution, Intel Intelligent Power Capability, Intel Advanced Smart Cache, Intel Advanced Digital Media Boost and Intel Smart Memory Access.

The 2eSST capabilities of the IC-DC2-VMEa provides up to 300MB/s peak transfer rate across the VMEbus. Moreover the backward compatibility protects existing investments.

IC-DC2-VMEa can be used in many highly integrated applications like :
  • Leading-edge computing,
  • Embedded network control,
  • Signal processing, etc

IC-DC2-VMEa : Main features

Processor Unit :
Intel Core 2 Duo
  • L7400 @1,5 GHz or T7400 @2.16 GHz
  • FSB 533 or 667 MHz
  • L1 caches : 32KB Inst. and 32KB Data per core
  • 4 MB of L2 shared cache
  • 512MB, 1 or 2 GB of SDRAM-DDR2 with ECC
  • BIOS Flash
  • Optional soldered Disk Flash
  • 32KB of NVRAM (non-volatile memory)
  • Real Time clock and four 32 bit-timers
  • Calendar clock with supercap backup
  • Temperature sensor and monitoring
    •  
      •  
I/O subsystem :
  • VME64x with 2eSST (Tsi148)
  • Two XMC/PMC slots (one partiallt VITA 35 compliant)
  • Four Ethernet 10/100/1000TX ports with :
    • Support for Jumbo frames
    • Host offloading, Packet filtering, VLAN, etc.
    • Two ports routed on rear P0 Vita 31.1 compliant and two on RJ45 front connectors
  • Two RS232 serial interfaces : one front and one on P2
  • Four USB2 controllers : two channels on P0, one front and one used by the USB2.0 Flash drive channel.
  • GPIO on P0
  • Two channels SATA controllers, one port on P0 and one port available through an optional front board or internal connector
Accessories :
  • 6U Rear Transition Module (RTM) providing : Giga Ethernet RJ45, USB2 and console ports, SATA connector and an HD68 connector for the PMC IO.
  • Internal 1,8” or 2,5” SATA Disk
Software : Interface Concept provides BSP for VxWorks® and Linux® (WindRiver Linux for Network Equipment or Interface Concept distribution). Other Real Time Operating Systems (LynxOS, Integrity...) can be ported on request.

An Engineering kit is available, providing :
  • a console port (RJ45 connector),
  • a COP/JTAG connector which accommodates emulation probes,
  • a JTAG connector allowing onboard CPLD programming.

(*) If the required environnement grade is not available, please consult us.
Depending on quantities, this board can also be customized to fully match your needs (processor, memory, IO ports...).
Feel free to contact our sales department.
All our products are compliant, nevertheless leaded versions can be provided on request.

Send this article to a friend Print the page

29510 BRIEC DE L' ODET - FRANCE
Tel. : +33(0)2 98 573 030 - Fax : +33 (0)2 98 573 000
info@interfaceconcept.com


Copyright © Anaximandre 2010 - Administration - Legal Disclaimer

Powred by Ker-e-liamm