|
|
IC-PQ2p-PMCa is
a PrPMC mezzanine card, based on the Motorola Power QUICC IIpro—MPC8349E.
It is designed to provide the highest level of performance with a
low-power consumption.
The PowerQUICC IIpro is a
high-performance embedded e300 core (formerly 603e or G2) PowerPC
core. The e300 core is completely software-compatible with
existing 603e core-based product.
IC-PQ2p-PMCa can be used in conjunction with CompactPCI,
VME carriers or proprietary design. Many highly integrated
applications can be used on-board :
- Processor with high
performance and I/O throughput
- Gigabit Ethernet interfaces
for high performance network connectivity or redundancy with
failsafe links
- Line cards
- Industrial control, etc.
|
Description
IC-PQ2p-PMCa is
powered by a MPC8349E, being part of the PowerQUICCII processor family.
It integrates a double-precision floating point unit. This e300 is a
32-bit superscalar core that provides 1260 MIPS at 667MHz. It also
integrates 2 * 32KB L1 caches.
IC-PQ2p-PMCa integrates
a 32/64-bit PCI controller, a DDR-ECC memory controller, a 4-channel
DMA, a multi-channel interrupt controller.
IC-PQ2p-PMCa provides
two 10/100/1000 Ethernet controllers. The two auto-sensing ports can run
as well with a 10/100BT (half or full-duplex) or a 1000BT network. These
channels supports jumbo frame. The transceivers implement an on-line
virtual cable tester. These ports are available on RJ45 front connector
or rear Pn4 PMC connector.
A embedded security
engine is also available for instance to perform single-pass encryption
and authentication as required by security protocols such as IPsec.
IC-PQ2p-PMCa
provides two USB2.0 channels. The controllers supports Hi-speed
(480Mbps), full-speed (12Mbps) and loaw-speed (1.5Mbps) operation. They
can run as device or host. These ports are available on USB front
connector or rear Pn4 PMC connector
IC-PQ2p-PMCa can
be used in several PMC or PrPMC configurations in compliance with PCI
2.2 32/64-bits at 33/66MHz.
IC-PQ2p-PMCa features
Processor Unit
- e300 core running at 667 MHz with :
- L1 caches : 32KB Inst. and 32KB
Data with parity
- MMU and FPU-DP capabilities
- DMA-channel controllers
- 128 or 256MB SDRAM-DDR with ECC
- 64 MB soldered Mirror Flash
- 128 MB soldered Nand Flash
- 32KB SPI EEPROM
- PPC Real Time clock and four 32
bit-timers
- Calendar clock with lithium cell or
supercap backup
This processor provides an integrated security
engine that supports DES, 3DES, MD-5, SHA-1, AES, ARC4, etc. encryption
algorithms.
I/O
subsystem
- Two Ethernet 10/100/1000TX ports with L2
acceleration and support for Jumbo frames
- Temperature sensor
- One Asynchronous RS232 serial port
- One Asynchronous TTL serial port (rear Pn4)
- General-purpose I/O on the rear Pn4
- Extension bus for Compact flash socket
Accessories
- Engineering kit for debug : JTAG/COP and
RS232 console
- Add-on Adapter to plug an extension
compliant with Compact Flash Type II (5mm thick) cards
- Dual PMC VME64 carrier with VME2eSST
capabilities : IC-PMC-VMEa.
IC-PQ2p-PMCa
on-board firmware
Our software takes in charge that
Motorola’s new MPC8349E is the legacy of the PowerQUICC architecture.
IC’s on-board firmware is a comprehensive set of software stored in
flash memory including:
IC_Boot
This module is called
by the reset vector when the board is powered up. It initializes the
PowerQUICCIIp, the memory controller, performs the Power on self tests,
the module IC_Bios, before using the PCI bridge and jumping in different
applications according to the values stored in memory.
IC_Bios
This
module allows the user to access the specific IC-PQ2p-PMCa hardware
resources via an easy-to-use API. A set of about 60 functions are
provided.
IC_Tools
It
is a firmware monitor which allows loading files from Ethernet via Bootp,
running files in RAM or flashing them. In addition it permits to display
or modify the RAM data. To end with, it enables the user to perform
maintenance tests.
IC-BSP
basic
These
BSPs products are based on the standard distribution of the OS editor.
They take in charge hardware initialization, interrupt handling and
generation, hardware clock and timer services, memory management, PCI
management, mapping of memory spaces, serial ports, MAC driver for
Gigabit and Fast Ethernet ports. For the MPC8349E, the advanced CPM
functionalities require specific protocol drivers.
Board
specifications
Physical
dimensions
PMC Module single width, IEEE
P1386 compliant (150 mm * 75 mm)
Power
requirements
Typically 7W on 3.3VDC
EM compatibility
EMC/EMI : 89/336/ECC, EN55022 ClE,
EN50082-2
Diagram
Click on the block diagram to zoom in
|
Ordering information
| Reference |
Model |
Features
(FB) = Front Board - (RB) = Rear Board |
Grade |
| TBD |
IC-PQ2p-PMCa
|
PowerQUICC IIpro - 8349E@667MHz - 256MB DDR/ECC - 64MB Flash - T° monitoring
2*1000BT(FB) - 1*USB2 (FB)
RTC_SuperCap - 128KB SRAM
Mass Flash (model & capacity TBC)
PPMC (monarch-non monarch) PCI 32/64bits 33/66MHz
|
Standard
|
|
Accessories |
| TBD |
IC-PQ2p-PMCa Eng Kit
|
Engineering kit + Console cable
+ User's + Manual (Hw & Sw)
|
|
This document supersedes
any earlier documentation relating to the products referred to herein.
The information contained in this document is current at the date of
publication. It may subsequently be updated or withdrawn without notice.
COPYRIGHT INTERFACE CONCEPT -
2007 - IC-PQ2p-PMCa v02.pub. All names, products and services mentioned are trademarks or registred trademarks of their respective
holders.
|
