|
|
|
(50Ko)
info
doc
|
IC-PQ2-PMCc PMC
module is designed in accordance with IEEE1386 standard. It
features a high performance 32-bits PowerPC processor with three
Fast Ethernet controllers. A local co-processor takes in charge
all communication functionalities unloa-ding thus the PowerPC
processor.
IC-PQ2-PMCc can be used in conjunction with CompactPCI, VME
carriers or proprietary design. Many networks or embedded
applications can be developed on-board :
- Processor module with a need
of high level of integration and low power consumption
- Low cost embedded application
- Communication controller with
Multi-Ethernet Links
- Time stamping on the data
flow, Traffic shaping, ...
- Ethernet channels with
redundancy
|
Description
IC-PQ2-PMCc is
powered by a MPC8270, being part of the PowerQUICCII processor family.
This embedded processor couples a 603e core with a RISC communication
processor and three Fast Ethernet controllers. This low power design,
less than 4W with three Ethernet ports, makes system integration easier.
IC-PQ2-PMCc CPU
board implements a 64bits PowerPC local bus. This local bus is usable by
the host via the 32 bit-PCI bus through a PowerPC-to-PCI bridge.
IC-PQ2-PMCc can
be used in Monarch, Non-Monarch or in stand-alone mode. According to the
application, the PMC processor module can be host or simple station.
IC-PQ2-PMCc provides
three full-duplex 802.3 and Fast Ethernet controllers associated to
three PHY 10/100TX interfaces. Each controller implements a local FIFO
and DMA channel and supports the promiscuous mode.
IC-PQ2-PMCc is
specially designed for industrial environment as it is available in
extended and rugged versions with coating. A temperature sensor monitors
the operational constraints. Surge protections implemented on each
Ethernet lines make this board particularly fitted to harsh conditions.
| 
